<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>M & H model 50</title></head><body> <div><font face="Arial" size="-4" color="#000000">>The one I worked on had a horizontal tongue, so that when the key was<br> >played the arc swung the sticker back.  The capstan moved  slightly<br> >foward. By raising the tongue flange rail, the sticker movement can be</font></div> <div><font face="Arial" size="-4" color="#000000">>made to match the capstan movement.</font></div> <div><br></div> <div>Perfect.</div> <div>That takes is a step beyond what I could cogitate on that early in the morning.</div> <div><br></div> <div>This will be something I will incorporate into upright action work.</div> <div><br></div> <div>I never paid any attention to this (just always tightened the rail screws where</div> <div>they were) but will now ascertain optimum travel.</div> <div><br></div> <div>Thanks Don.</div> <div><br></div> <div>This should be included in any upright work detail. Call it an overlooked aspect.</div> <x-sigsep><pre>-- </pre></x-sigsep> <div><br> Regards,<br> <br> Jon Page</div> </body> </html>