<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on">
<TBODY>
<TR height="100%" width="100%" UNSELECTABLE="on">
<TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">I know this may be more work than you want to do for this, but a thicker butt felt is also a solution.</TD></TR>
<TR UNSELECTABLE="on" hb_tag="1">
<TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">
<DIV id=hotbar_promo></DIV></TD></TR></TBODY></TABLE>
<BLOCKQUOTE id=68468518>
<DIV><BR><BR><B><I>David Graham &lt;dcgrpt@earthlink.net&gt;</I></B> wrote: 
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Hi all: I tune a LOT of new Yamaha uprights, and they all do this to some<BR>extent. You have to check two things: the lost motion-as soon as there is<BR>more than enough,the problem will occur; and you have to weaken the damper<BR>return springs. They are too tight, and "push back" on the key at the bottom<BR>of the stroke, jamming the jack as it tries to escape. I don't see too many<BR>U#s, but it certainly happens a lot on P22s,U1s and the T series pianos. I<BR>weaken the spring by pushing it against the damper lever with the Hart<BR>spring tool. Well, now that I think of it, there is one other potential<BR>cause- many times the shoe at the bottom of the balance hole is too thick,<BR>and the key will bind as it rocks, even though it seems free when you lift<BR>it. Pianotek makes a chisel tool that goes inside the key and removes some<BR>of the wood.<BR>-- <BR>---<BR>David Graham
 <DCGRPT@EARTHLINK.NET><BR><BR><BR>_______________________________________________<BR>caut list info: https://www.moypiano.com/resources/#archives</BLOCKQUOTE></DIV></BLOCKQUOTE><BR><BR>Vince Mrykalo<br>University of Utah<p>
                <hr size=1><font face=arial size=-1>Do you Yahoo!?<br>
Yahoo! Tax Center - <a href="http://taxes.yahoo.com/filing.html">File online by April 15th</a>