<HTML>I just got done restringing a D, including new dampers= . I also put on a new set of h/s/f. As I was doing my last voicing, I discov= ered that when I put on the shift, about 4 or 5 notes would not dampen the r= ight string cleanly. Under normal playing, these dampers work fine. But with= the shift, the right string rings on just a little more than I want. I trie= d adjust the damper head, but to no avail. In fact, the more I tilted the he= ad to the right, the worse the problem got. When I tilted the head to the le= ft, it didn't solve the problem either. It is not the adjacent damper lifter= holding the damper up. I checked that. I'm at a loss. Any one know why this is happening, and what I can do to correct the problem= ? Wim </HTML>