<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Re: those pesky swings</TITLE>
<META http-equiv=Content-Type content="text/html; =
charset=us-ascii">
<STYLE type=text/css>BLOCKQUOTE {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
DL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
UL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
OL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
LI {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
</STYLE>
<META content="MSHTML 6.00.2600.0" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Hi
Wim,</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>sorry
to give you more work so close to the holidays, but the
"protek" topic comes up from time to time, so would you mind =
trying
the following?</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Choose
the centre-pin that provides a snug birds-eye fit (hopefully only one
size-over), and gently ream/burnish the bushing to get a reliable =
function; 3
1/2, 4 swings, whatever.</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Then, ... treat it with Protek again! </FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>The situation where Protek makes a overly tight
centre ridiculously loose in a nanosecond, has been blamed on a =
number of
likely</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>causes; p</FONT></SPAN><SPAN class=140145521-17122002><FONT =
face=Arial
color=#0000ff size=2>lated center pins, over-burnishing, =
corrosion,etc. And I
think any of these may be correct, given the =
circumstance.</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Since
you hadn't mentioned the origin of the parts, or whether they had =
previously
been re-pinned, I'm going to guess that corrosion is the
culprit.</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Hopefully the reaming will remove any glaze from the bushing
cloth, the (repeat) Protek'ing will do no more than it's =
supposed to (protect the nice shiny pin and the cloth), and you will =
have a very
stable part. Please share your results, if you don't mind.
</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>With
"mystery" actions, where the pinning seems tighter than it has a right =
to be, my
habit is treat the centers with Protek in advance of re-pinning, just
to know what I'm dealing with. </FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>BTW, I
do recall Newton mentioning protek'ing center pins quite recently, =
and how
sad he can't be here to share his wisdom with us now. =
</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>kindest regards,</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Mark
Cramer,</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2>Brandon University</FONT></SPAN></DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=140145521-17122002><FONT face=Arial color=#0000ff =
size=2> </FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT =
face=Arial size=-1>We
all know that a hammer is supposed to swing 4 - 8 times. If it is less =
than 4,
then the bushing is too tight. If it's more than 8, supposedly the =
bushing is
not tight around the pin, and that might cause the hammer to wobble up =
to the
string, which will eventually lead to uneven wear on the hammer, whcih =
creates
tone problems, ya da, ya da. <BR><BR>So here is the problem. I've =
got
this hammer with only 3 swings. So that mean the bushing is too tight. =
Before
I take the pin out, ream the bushing, and put in the same size pin, I =
put a
little Protec on the bushing. But now, all of a sudden, I've got 10 - =
12
swings. According to the above presumption, the bushing is now not =
tight
around the pin any more.<BR><BR>Or is it? Has the introduction of =
Protec
shrunk the bushing to the point I need to ream and repin with a larger =
pin? Or
do I leave the original pin in there, and allow the 10- 12
swings?</FONT></DIV>
<BLOCKQUOTE cite="" type="cite">
<BLOCKQUOTE cite="" type="cite"><FONT face=Arial
size=-1><BR></FONT></BLOCKQUOTE>
<BLOCKQUOTE cite="" type="cite"><FONT face=Arial
size=-1>Wim</FONT></BLOCKQUOTE></BLOCKQUOTE>
<BLOCKQUOTE cite="" type="cite"><BR></BLOCKQUOTE>
<BLOCKQUOTE cite="" type="cite"><BR></BLOCKQUOTE>
<BLOCKQUOTE cite="" type="cite"><FONT face=Arial color=#0000ff =
size=2></FONT> </BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>