<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body>
David Ilvedson wrote:<br>
<blockquote cite="mid200404191905.i3JJ5w411543@bridget.rudoff.com"
type="cite">
<pre wrap="">Richard,
Well I'd say the "not likely" like happened...;-] I've never seen cracks around a bridge pin from a spill...go figure. I'd like to see some pics!
</pre>
</blockquote>
I tried to take some, but my digital doesnt do closeups well enough to
show them. Actually... I've seen this kind of thing before and always
figured it was a natural result... tho I'll admit it doesnt happen all
the time. Maybe the bridge not having any finish on it is a
contributing factor ?? Anyways... heres the best shot I managed..
perhaps you can just see the hairline cracks on the middle hole of both
pictured unisons. This is the front edge.<br>
<br>
<img src="cid:part1.06000109.01040908@grieg.uib.no" alt=""><br>
<blockquote cite="mid200404191905.i3JJ5w411543@bridget.rudoff.com"
type="cite">
<pre wrap="">I wonder what would have happened if you had left the bridge pins in the bridge?
</pre>
</blockquote>
Thought crossed my mind as I was pulling them... I took as much care as
possible to pull them straight out so as too not stress the cap. Used a
small vice grips and turned them a bit to free them up. Actually... I
think I got to them just a bit too late. Looks like I was about 30
hours after the deed was done. <br>
<br>
<blockquote cite="mid200404191905.i3JJ5w411543@bridget.rudoff.com"
type="cite">
<pre wrap="">David I.
</pre>
</blockquote>
Cheers<br>
RicB<br>
</body>
</html>