<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
 --></style><title>Re: Another 'D'</title></head><body>
<div>Wim,</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1">In a message
dated 2/5/02 8:47:19 AM Central Standard Time, atodd@UH.EDU
writes:</font><br>
<font face="Arial" size="-1"></font>
<blockquote type="cite" cite><font face="Arial" size="-1">Besides the
felt punching already there on each end, I noticed<br>
that on the bass end, there were a couple of center rail thick<br>
cardboard punchings. So I though, why not? I put a thick(ish) one<br>
in on the treble end reinstalled everything and the noise was
gone.<br>
I don't know how long it'll last. I may have to do something with<br>
the block later but for the moment, everything is quiet.
:-)</font><br>
</blockquote>
</blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1"><br>
<br>
Although you might have solved the problem for the time being, I not
sure if the oval hole was created by the side to side movement of the
damper tray.</font></blockquote>
<div><br></div>
<div>No, I didn't mean that. I just meant that a little side pressure
stopped</div>
<div>the noise. Adding that cardboard punching did essentially the
same thing.</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1">I would
think that the tray moving up and down might have created the oval
hole. Be sure the try is not only tight side to side, but that the
block is tight from top to bottom. If there is a gap between the block
and to belly rail or the block and the keybed, you might want to put a
front rail punching under or on top of the block to get it
snug.</font></blockquote>
<div><br>
The top and bottom of the block is snug. I checked that, so it
must</div>
<div>have been the movement of the guide pin within the block itself.
</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1">This problem
might have happen if the damper tray was ever taken out before. The
person who removed it might not have put the pouching back that came
out.</font></blockquote>
<div><br></div>
<div>The tray has never been out since Rappaport's rebuilt it. At
least since</div>
<div>it's been here.<br>
</div>
<blockquote type="cite" cite><font face="Arial" size="-1">Just a
thought.</font></blockquote>
<div><br></div>
<div>Thanks.</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial"
size="-1">Wim</font></blockquote>
<div><br></div>
<div>Avery</div>
</body>
</html>