On Mon, 18 Dec 1995, Dennis Johnson wrote:
> I happen to be shopping for a new drill press myself. Is it true that the
> import and domestic Delta's actually have the same motor and shaft, but you
> pay an extra $1,000 to have it assembled in the US?
>
>
Dennis: I'd think twice before spending anywhere NEAR $1,000 for
a drill press! Especially a Delta. Woodworkers Supply lists the 16 1/2"
model for under $500, and the radial press at $300.
John Minor
Piano Technician
University of Illinois
jminor@uiuc.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC