>>> Michael Wathen 556-9565 <Michael.Wathen@UC.Edu> 01/10/95 08:47am >>> Here's another way: Now to deal with the overpull where the pin has moved to a sharper position but the pitch of the string has not changed; I lift straight up on the end of the shaft until the pitch of the string changes. Keep in mind that what I am doing is actually bending the pin and not moving it in the block. Next I give a jiggle to the pin to restore it to equilibrium at the same time I am delivering hard blows to the piano key. Repeat steps as necessary. Likewise you can tune a string to a lower pitch in which case you would bend the pin in the opposite direction. Michael Wathen "Mike in Cincinnati" But you're not REALLY bending the pin, right? vince
This PTG archive page provided courtesy of Moy Piano Service, LLC