Action Geometry

[S. Brady]

On Wed, 21 Jun 1995, Serge Harel wrote:

> When the key is half way down you suppose to have a line
> between the hammer flange centre pin, the capstan-wippen contact point
> and the wippen flange centre pin.

      I think what Serge meant here is that there should be a straight
line between the *bottom of the key at the balance point*, the
capstan-wippen contact point, and the wippen flange center pin.




Steve Brady, RPT        "The most expert and rapid tuners are...
University of Washington       possessed of a highly excitable,
sbrady@u.washington.edu        nervous, and emotional temperament,
                         verging on the border of insanity at times."
                              -Daniel Spillane, The Tuner's Guide