>Having replaced several sets of plastic action parts, I found that it saved >considerable time for me to pull out the new damper wires and reinstall the >original damper wires from the plastic damper levers into the new wood damper >levers. This seemed to go quickly and only required a little wire bending. > Try this on a few next time you have a set to change. > >Paul Stephens, RPT Pretty neat idea there, Paul. Thanks for the great tip. I'd like your permission to publish that in our Chapter newsletter. Keith McGavern, RPT kam544@ionet.net Oklahoma Baptist University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC