In a message dated 96-04-30 10:30:10 EDT, you write: >you can destring the capo >areas, refninsh the capo bar, check for loose bridge pins, etc., and then >restring using a "dummy pin" for making the coils, which are then >transferred onto the existing tuning pins. By using only 2 1/2 coils, you >can reset the pins somewhat to tighten. Charles, Would you please describe your method of refinishing the capo bar. Thanks for the above tips. I prefer using a dummy pin as well, to attatch the string to the existing tuning pin as long as the pins are still tight enough. Doug Hershberger,RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC