Ronald R Shiflet wrote: > > List, > Several people have recommended the Spurlock felt cutter to get > uniform cuts on damper felt. I haven't tried one yet but I have seen > one. Before I purchase one, can anyone offer an explanation why this > cutter will cut straight. It seems that the felt would still be getting > compressed as the blade goes down and therefore the cut would not be > straight. > > Ron Shiflet > Phoenix Chapter Ron, you extend the blade of the break-away knife out most of its length and pull the blade through the slot to effect the cut. The felt isn't compressed at all! Warren -- Warren D. Fisher fish@communique.net Registered Piano Technician Piano Technicians Guild
This PTG archive page provided courtesy of Moy Piano Service, LLC