Chat room for AOL people

John Musselwhite musselj@cadvision.com
Thu, 31 Jul 1997 17:33:44 -0600


At 11:05 PM 7/30/97 -0400, Dave wrote:

>I have recently tried to get on the Tuesday Night chat for piano technicians
>and have not had much success.  I understand that there are things I need to
>do for AOL users before I can get in.

Sorry you missed us! It's great fun... <g>

Here is what AOL users must do to get on the chat channel. Make sure you
have at least AOL 3.0 and the 16-bit version of mIRC or a similar chat
client installed. It's important to use a 16-bit chat client and NOT one for
Win95.

Once you're on AOL, minimize it and load mIRC. Select any "Starlink" server
from the "Setup Information/IRC Servers" menu and press "edit" and set the
Port to "7000". Save it out and press "Connect".  If it doesn't connect
first time try a couple more times to make sure as sometimes AOL is tied up.
If it still fails to connect (cant find IRC server) change the port to 7070
and try again.
Once it connects, click on the "Channels" folder and type in  #pianotech",
click on "Add" and then click on "join".

The only difference between using IRC with AOL and other servers is that the
"port" for the IRC client must be set to 7000 as that is the port AOL uses
to reach IRC. Some success has been reported with port 7070 as well if 7000
refuses to respond but I can't verify that. 

Good luck!


John Musselwhite, RPT               
Calgary, Alberta Canada   
musselj@cadvision.com
http://www.cadvision.com/musselj/



This PTG archive page provided courtesy of Moy Piano Service, LLC