> Anyone happen to have the original plain wire sizes for a 4'9" If you are doing this in a spread sheet you can put any numbers you wish and then adjust so the tension is as close as you get get to something in the order of about 150 to 160 pounds for each note. Or you can reenter the formulea to give you a requested tension. If you are using a program by Parsons or Dierauf you can just input sizes and watch the tension and change the size to get the tension you wish. With nothing more than the speaking lengths you can design an entire scale. Newton nhunt@jagat.com
This PTG archive page provided courtesy of Moy Piano Service, LLC