Jim, What are "loops". I understand what you're saying, but I'm not familiar with that term. Avery >However, you are on the right track. You DO need to move the dampers a >little to get off of the nodes and more onto the loops. I think it was >just a matter of terminology on your part. > >Sometimes on a vertical piano when the dampers do not sit level on the >strings, you can hear a harmonic over-ring. Dampers should be placed >such that some odd numbered loops are covered and some even numbered >loops are covered. If the damper is tilted too much, one or the other >of the partials will ring on. > >Jim Coleman, Sr. _____________________________________ Avery Todd, RPT Moores School of Music University of Houston 713-743-3226 atodd@uh.edu http://www.uh.edu/music/ _____________________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC