David ilvedson wrote: > > > Date: Sat, 29 Mar 1997 17:02:48 -0500 > > From: jptuner <jptuner@asan.com> > > Subject: plate spraying! > > To: pianotech@byu.edu > > Reply-to: pianotech@byu.edu > > Hey, if ya just leave the strings and pins in when ya spray ya > don't have to worry about the pinblock... > > David ilvedson, RPT (with tongue firmly planted) > Pacifica, CA > > > hello all, > > I have been wondering when spraying plates with spray paint, > > can the oils from the paint effect the pin block,of course when i > > restring i always spray the plate to make it look good, the plate does > > not come out ,these are restringing jobs in homes or my shop, i have > > restrung close to a 100 or so pianos and have not had a problem yet.But > > does it or could it effect the pin block.PS I have never used a clear > > coat on the finish, but my results are very pleasing,i will try the > > clear on my next job. > > jptuner! > > > >david is that your humor or are you trying to be serious?
This PTG archive page provided courtesy of Moy Piano Service, LLC