Also, with that key height, make sure the keys are at least 1/4" onto the front rail pins. Anything less than that will cause excess wear. Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At 11:53 AM 5/22/97 -0500, you wrote: > If the 2-3/4" height fits the surrounding case parts and the necessary >key dip, I'd regulate out a few sample notes and make sure everything >will work. If so, go with that. > Just my opinion. >Avery Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC