Key height(was: Mehlin Grand)

[Jon Page]

The tip of the pin will be plowing its way along the bushing.
Plus if the bushing is wider near the bottom then there will be
extra side to side play.

Something I forgot to mention before is the sharps are higher
than the naturals so you need to pay particular attention to them
on the ends and in the middle.
Jon Page
Harwich Port, Cape Cod, Mass. (jpage@capecod.net)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At 10:45 AM 5/23/97 -0700, you wrote:
>How so?
>Vince Mrykalo
>
>>>> Jon Page <jpage@capecod.net> 05/22/9710:40am >>>
>Also, with that key height,  make sure the keys are at least 1/4" onto
>the front rail pins. Anything less than that will cause excess wear.
>
>
>

Jon Page
Harwich Port, Cape Cod, Mass. (jpage@capecod.net)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~