Hello all,
I have modified the format only of Newton's data (hopefully not
manipulated). Perhaps someone who buys Röslau from
APSCO could take a mic and see which column of numbers
their Röslau wire matches the best.
Imported Röslau from Jahn, of Germany is always marked
on the package in millimeters (.925 mm). The ring of Röslau I
bought from APSCO recently just had a gage number (16) on the
package, no corresponding diameter in either inches or
millimeters. It matched my imported 16 1/2 exactly, in other words,
it mic'ed at .950 mm.
David Sanderson
Littleton, MA
pianobiz@juno.com
BTW Thanks to Joel Rappaport for helping me find the ö on my
keyboard. The answer was Alt button down and 148 on the numbers pad.
______________________________________
American Wire Metric wire
Gage .001" mm .001" mm
12 .029" .737mm .0285" .725mm
12.5 .030" .762 .0295 .750
13 .031" .787 .0305 .775
13.5 .032" .813 .0315 .800
14 .033" .838 .0325 .825
14.5 .034" .864 .0335 .850
15 .035" .889 .0344 .875
15.5 .036" .914 .0354 .900
16 .037" .940 .0364 .925
16.5 .038" .965 .0374 .950
17 .039" .991 .0384 .975
17.5 .040" 1.016 .0394 1.000
18 .041" 1.041 .0404 1.025
18.5 .042" 1.063 .0413 1.050
19 .043" 1.092 .0423 1.075
19.5 .044" 1.118 .0433 1.100
20 .045" 1.143 .0443 1.125
20.5 .046" .0453 1.150
21 .047" 1.194 .0463 1.175
21.5 .048" .0472 1.200
22 .049" 1.245 .0482 1.225
23 .050" 1.295 .0512 1.300
23.5 .0531 1.350
24 .053" 1.346 .0551 1.400
24.5 .0571 1.450
25 .055" 1.397 .0591 1.500
26 .0630 1.600
--------- End forwarded message ----------
This PTG archive page provided courtesy of Moy Piano Service, LLC