Renner Lite Hammers (was Let's talk about light....

[Newton Hunt]

David C. Stanwood wrote:
> 
> >Date: Thu, 13 Nov 1997 20:43:34 -0500
> >From: nhunt@jagat.com (Newton Hunt)
> >Subject:...)
> >
> >Hi, Ed,
> >
> >THose are light hammers.  Get some 1/8" solder and drill a hole or two
> >through the molding and insert the solder in the holes then try the
> >tone...
> >       Newton
> 
> Newton,
> 
> I think it would be more practical for Ed to use the Yamaha clip-on shank
> weights to mock up an extra gram of strike weight.
> 
> David Stanwood

Good idea.  I have also used medium solder rapped around the shank to do
some testing.

Thanks, see you in Cuba.

	Newton
	nhunt@jagat.com