Dear Howard, If you want give me a description of how this is done, please go ahead. I'm looking forward to the way it works. Peter ---------- > Van: Howard S. Rosen <hsrosen@emi.net> > Aan: pianotech@ptg.org > Onderwerp: Re: Bechstein > Datum: lundi 13 octobre 1997 0:37 > > Dear Peter, > > The first thing that comes to my mind is that the springs are not adjusted > properly and uniformly. Do you require a description of how this is done? I > am sure that other technicians will chime in here with more help for you. > > Howard S. Rosen, RPT > Boynton Beach, Florida > > ---------- > > From: Peter Kestens <KESTENS.P@Debcom.be> > > To: pianotech@ptg.org > > Subject: Bechstein > > Date: Sunday, October 12, 1997 5:12 PM > > > > PETER KESTENS > > Het Muziekinstrumentenatelier > > BELGIUM > > KESTENS.P@Debcom.be > > > > Dear list, > > > > I'm truying to do a clean job in restorating a Bechstein grand. Now, > when > > I'm started with the regulation alittle problem is coming. > > I've placed the hammers with a portable let off rack at the same height > but > > when you wait a while you see appearing differences in the height of the > > hammers although my setting was done very accurate. Any explanation for > > this? > > Peter
This PTG archive page provided courtesy of Moy Piano Service, LLC