Jerry, A firm felt like hammer felt scraps works well. You don't want felt that will easily pack down and change your hammer blow and lost motion settings. Avery >In a message dated 97-10-24 13:54:54 EDT, you write: > ><< where can one get replacement pads, or > what do you use as an alternative? >> > >Thick bellying felt works. Also, you can stack/glue a few pieces of back-rail >felt to achieve the desired thickness. > >Good luck > >Greg Torres >Tunapiana@adisfwb.com ___________________________ Avery Todd, RPT Moores School of Music University of Houston Houston, TX 77204-4893 713-743-3226 atodd@uh.edu http://www.uh.edu/music/
This PTG archive page provided courtesy of Moy Piano Service, LLC