> From: "pianoman" <pianoman@inlink.com> > To: <pianotech@ptg.org> > Subject: Re: Mafco+ > Date: Mon, 27 Oct 1997 21:03:13 -0600 > Reply-to: pianotech@ptg.org James, I would be interested in your procedure in bench making. What kind of tools are needed etc. David ilvedson, RPT > Jon, > I would beg to differ. I make the superior bench, but it takes me about 1 > month per bench. : >:) > James Grebe > R.P.T. from St. Louis > pianoman@inlink.com > "Only my best is good enough" > > ---------- > > From: Jon Page <jpage@capecod.net> > > To: pianotech@ptg.org > > Subject: Re: Mafco > > Date: Monday, October 27, 1997 8:22 PM > > > > Why bother with Mafco, Jansen makes a superior product. > > > > Jon Page > > Harwich Port, Cape Cod, Mass. (jpage@capecod.net) > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > ~~~~~~~~ > > At 04:20 PM 10/27/97 -0500, you wrote: > > >A while ago someone mentioned what happened to Mafco bench company. > Could > > >someone update me privately as to how I can contact them? > > > > > >Many thanks, > > >Mark Graham > > >Baldwin-Wallace Conservatory of Music > > >Berea, Ohio > > > > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC