Rubber grommets

Guy, Karen, and Tor Nichols nicho@lascruces.com
Fri, 05 Sep 1997 10:20:14 -0600


At 01:53 PM 9/4/97 -0400, you wrote:
>
>I have to go and replace the rubber grommets  on a late 70's Baldwin spinet.
>It has little plastic nuts on the spinet wires, then a felt washer, then the
>rubber grommets that stick into the key fork. They have hardened and are now
>clicking badly. 
>
>Thanks, 
>B. Simon
>Phoenix
>
You know, on most of those it's easier to unhook the sticker wire from
below and just slide the new ones on. No nut adjusting at all. The old ones
can be pulled, twisted, or clipped off. Have fun.
guy
Guy Nichols, RPT
nicho@lascruces.com
	"Irreversibility is the mechanism that brings order from chaos"
						Prigogine


This PTG archive page provided courtesy of Moy Piano Service, LLC