Hi Peter, The basic answer is slowly. It will have to be ground off with a grinder. You cannot use heat cutting tools (torches) with damaging the plate. Get a 75 mm grinder which can take grinding wheels or sandpaper. This tool can be used to grind wood (fitting pinblocks to plates) as well as grinding. Carefully consider how the metal removal will effect stress holding abilities. Plates are rountinely ground in the foundries so that it not the issue; safety is, your's, the piano's and any prospective owner's. How all is well with you and yours. Newton nhunt@jagat.com
This PTG archive page provided courtesy of Moy Piano Service, LLC