Is this a warranty repair? At 07:06 AM 8/29/98 EDT, you wrote: >Greetings, > > I agree with Jim C. HEAT!! > Heat is not only your friend, but your challenge. How to get those pins >up around 250 degrees without damaging the bridge? In the piano? Maybe a >small clothes iron, after first pressing several layers of tin foil over the >pins? Maybe talk to the rebuilder, making sure there is not a lot of CA >involved. > Let us know how this turns out, ( and you really don't want to break a pin >off, *DAMHIK*!) >Regards, >Ed Foote > > Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC