List, Just converted my [ 5 inch Vice Grips ] to pull pins using the Maffe coil impact weight. Supplies needed, One 6 inch 1/4 inch bolt with 20 thread to the inch [standard coarse ] and one 1/4 inch flat washer. Work required, Grind smooth 1/4 inch of the tip removing metal so that the threads are gone from the tip. Then rethread so that there are threads from the tip back 1-1/2 inches. Put washer on bolt then weight and put on Vice Grips. You're ready to rumble. Joe Goss You know you are on the level if your bubble is in the middle.
This PTG archive page provided courtesy of Moy Piano Service, LLC