Roger Jolly wrote: > > Hi Frank, > All curent producton grands, any good Yamaha dealer should be > able to show a sample bolt and sleeve, the system is ALMOST self explainatory. > Regards Roger > > At 09:03 PM 29/08/98 -0400, you wrote: > >BopPiano@aol.com wrote: > >> > >> First, I would look for drafts (is there an air conditioner or other > >> situation causing fluctuation) Next, are the plate bolts adequately > tight ? > >> (note-don't tighten perimeter bolts on models with with plate suspension > >> similarb to Baldwin Accujust) > > > > > >Hey! I didn't know about the plate suspension in Yamahas!!!! Whcih > >models, please. > >-- > > > >Frank Cahill > >Associate Member > >Northern Va > > > Roger Jolly > Baldwin Yamaha Piano Centre > Saskatoon and Regina > Saskatchewan, Canada. > 306-665-0213 > Fax 652-0505 Thank you. Boy, I can't beleive I missed this. I assume that like the Baldwin accu-hitch plates, you can damage the plate if you tighten those rim bolts. -- Frank Cahill Associate Member Northern Va
This PTG archive page provided courtesy of Moy Piano Service, LLC