Ed,
11:36 12/7/98 EST, you wrote:
>Was the problem caused by the recent work?
No.
>Were these hammers next to each other.
No.
>Was it a pinning problem?
No.
and Avery guessed:
>Jack too low in the rep window, thereby not contacting knuckle?
Yes. That's why there was lost motion, but why?
Conrad Hoffsommer - mailto:hoffsoco@luther.edu
Certified Calibration Technician (CCT) of
Biopowered Digitally Activated Tone Generation Systems
"If you have to plug it in, or you can't watch how it works,
I don't work on it."
This PTG archive page provided courtesy of Moy Piano Service, LLC