If if comes to that I would use WoolWax and steel wool with the grain. It's a lot of work but can work wonders... David Ilvedson, RPT Pacifica, CA > Date: Tue, 22 Dec 1998 10:12:09 -0400 > From: Quincy <Quincy@igs.net> > To: pianotech@ptg.org > Subject: Re: Satin Finish > Reply-to: pianotech@ptg.org > The best way to clean the piano is using fine steel wool with windex.Rub > the steel wool in same direction for complete job. > Make sure the finish is polyester . Some of the parts on the cabinet > were finished with verathane. Test a small area on these parts and watch > the results (legs, bench, lyar, ) > > Hope this works Merry Xmas Quincy Damphousse Pianos > http://www.igs.net/quincy > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC