>From Ralph Martin: >It also helps to run a straight coathanger through the spring coils so >that they line up properly before squeezing in the spring ends. Neat idea, Ralph. >From Paul McCloud, RPT: >...If there is any tail left over sticking out, I >cut the excess off with centerpin cutters... > ...make sure that >the length of the spring isn't too short to ride nicely in the slot in >the hammer butt... Thanks for the tip and the advice, Paul. Keith A. McGavern kam544@ionet.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA
This PTG archive page provided courtesy of Moy Piano Service, LLC