Hi Newton, When you use hardwood wedges to fill a gap between the pinblock and the flange, do you lower the string tension? Howard S. Rosen, RPT Boynton Beach, Florida ---------- > From: Newton Hunt <nhunt@jagat.com> > To: pianotech@ptg.org > Subject: Re: Wurtilizer Tuning Woes > Date: Thursday, February 05, 1998 7:53 PM > > Check tightness of as many plate screws as you can. > Check piblock to plate fit. > > If all seem OK, use a pinblock jack to raise the pinblock a bit and then > retighten plate screws. > > If their is a gap at the flange cut hardoow wedges and fit and glue into > the gap. > > Retune. > > Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC