Does anyone know of a source for these hardwood wedges? I have always had to make my own. Howard S. Rosen wrote: > Hi Newton, > > When you use hardwood wedges to fill a gap between the pinblock and the > flange, do you lower the string tension? > > Howard S. Rosen, RPT > Boynton Beach, Florida > > ---------- > > From: Newton Hunt <nhunt@jagat.com> > > To: pianotech@ptg.org > > Subject: Re: Wurtilizer Tuning Woes > > Date: Thursday, February 05, 1998 7:53 PM > > > > Check tightness of as many plate screws as you can. > > Check piblock to plate fit. > > > > If all seem OK, use a pinblock jack to raise the pinblock a bit and then > > retighten plate screws. > > > > If their is a gap at the flange cut hardoow wedges and fit and glue into > > the gap. > > > > Retune. > > > > Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC