Plastic Charps

[Larry Fisher]

>From: Danny Moore <danmoore@ih2000.net>
>Subject: Glue & Plastic

>What would be the glue of choice for gluing plastic sharps?  (or
>perhaps, plastic flats.)

I prefer PVC-E glue.  The bond is flexible so when the wood and plastic move
about, expanding and contracting at different rates, the glue takes the flex
and the bond remains in tact.  Ripping one of these things loose after the
glue dries, compared to ripping a Titebond or wood glue held charp convinced me.

Lar

                                    Larry Fisher RPT
   specialist in players, retrofits, and other complicated stuff
      phone 360-256-2999 or email larryf@pacifier.com
         http://www.pacifier.com/~larryf/ (revised 10/96)
           Beau Dahnker pianos work best under water