John... The best way to fix that music rack is drill a 1/4 inch hole where the old screw came out, then use a brass sleeve (shank repair type) put a little glue in the hole and slide the sleeve in. Now just put a new hammer shank in the sleeve with a bit of glue on it and cut it off flush. Do it on both ends and you have a repair that will last forever. Dick RPT Montana ---------- > From: Jon Page <jpage@capecod.net> > To: pianotech@ptg.org > Subject: Re: CA adhesive repairs > Date: Friday, February 27, 1998 3:32 PM > > At 12:01 PM 2/27/98 -0600, you wrote: > > Can I fill the hole with gap filling CA and insert > >silicone coated screw and later be able to remove screw? > > > >Conrad > > YES > > Or even Protek. > > Jon Page > Harwich Port, Cape Cod, Mass. (jpage@capecod.net) > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > ~~~~~~~~`~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC