Don, On the counter bearing ridges I also apply a little Protek. Not enough to travel on the wire, just on the point of contact. Jon Page At 12:22 PM 7/6/98 -0600, you wrote: >Hi Jon, > >I understand better now...but what treatment do you do for pressure ridges??? > > >At 11:44 PM 7/5/98 -0400, you wrote: >>At 09:09 AM 7/6/98 -0600, you wrote: >>>Hi Jon, >>> >>>Hmmm treating pressure ridges---with Pro-tech???? Or is that Jumping >>>pins???? More info please. >> >>Not the pins, just the wire. Mostly on the wide felt between the agraffes >>and tuning pins. >> >> >> >>Jon Page >>Harwich Port, Cape Cod, Mass. (jpage@capecod.net) >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >>~~~~~~~~`~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. >"Tuner for the Centre of the Arts" >drose@dlcwest.com >http://www.dlcwest.com/~drose/ >3004 Grant Rd. >REGINA, SK >S4S 5G7 >306-352-3620 or 1-888-29t-uner > >
This PTG archive page provided courtesy of Moy Piano Service, LLC