Hi List, There was a class I attended once that showed how to anneal a brass rail. It was a matter of heating it to a high temperature for an amount of time, and then it became flexible again. With the rail off, it was easy to tell if it had 'crystallised' or not. If you can get it in time, a couple of repair clips might be enough and salvage the rail. I can't find my notes with the specifics of temperature and duration of heat. I did wonder, if a self clean oven on clean would work? Any thoughts from the metal experts? Regards, John M. Ross PTG Assoc. Windsor, Nova Scotia, Canada
This PTG archive page provided courtesy of Moy Piano Service, LLC