Hi Wim, I'm with Keith, I don't believe it poured out of the flange center either. As for an alternative... What kind of flux was used in soldering the rails and how thoroughly was it cleaned off afterward? Also, anyone know the PH of these flanges? Then again, it could just be evil spirits. Ron >If the verdigris was found only on the hammer rail, I would tend to agree with >you. But I have found the stuff also on the wippen rail, without the cloth. >If it didn't come from the center pins, how did it get there? > >Wim > Ron
This PTG archive page provided courtesy of Moy Piano Service, LLC