Cliff, Removal of all parts is not required. Usually just the drive chain, one large hose and a brace or two need to be moved. Tilt the parts that are in the way and go too it. I use a long steel handled double wedge mute to reach around things in the way. Haven't used a felt strip in years <G> Joe Goss ---------- > From: Cliff Lesher <lesher@jdweb.com> > To: pianotech@ptg.org > Subject: Tuning Player Uprights > Date: Saturday, October 17, 1998 10:16 AM > > I read recently in Fine's Piano Book the following about player pianos: > > "Many (technicians) won't even consent to tune them because the player > mechanism is in the way and makes tuning difficult. Actually, a > knowledgeable technician can often remove the parts that are in the way > quite quickly..." > > This left me with the impression that tuning a player would be nearly > the same as tuning a "normal" upright. > > With these facts and impressions in mind, I faced my first player > upright the other day. I immediately removed the brace that extended > from the plate to support the "roller box." I was about to remove > this box altogether and the bellows assembly to its right when I saw all > of the tubing connected to them. This was enough for me to disqualify > myself as "knowledgeable" for the time being. This was a pretty > frustrating tuning. > > Can anyone impart some knowledge please? > > Cliff Lesher > Lewisburg, PA
This PTG archive page provided courtesy of Moy Piano Service, LLC