20 tons of tension slight correction

[Jim Coleman, Sr.]

Hi James:

Since I worked for several years for a dealer who sold Everetts, I observed
that the backposts were indeed cast iron, but they indeed were in tension
and not in compression inspite of their literature.

Jim Coleman, Sr.

On Tue, 1 Sep 1998, pianoman wrote:

> Hi Jim,
> The Everett did not use cast iron back posts.  They were iron tension
> LEVERS.  Didn't you read all their literature?
> James Grebe
> R.P.T. of the P.T.G.
>  St. Louis, MO.
> Competent Service since 1962
>                                         Caster Cup Center of the Universe
>                    Home of Handsome Hardwood Caster Cups
> pianoman@inlink.com        
> 
> ----------
> > .net
>