One inch sanders for trimming

[ETomlinCF3@aol.com]

Another tip on keytops is to line them up after you have resurfaced them and
spray the fronts with a white primer.  It gives it a new look on those fronts.
(remove or clean off the chunks first) 
I use an old glue bottle filled with PVCE glue and squirt on a bead then press
the key on.  Do not brush, that takes way to long.  After you get a few sets
behind you, you will know just how much glue is enough.  If it ooozes out, no
problem, hit it with the sander after.  It takes a total of 2- 2 1/2 hours to
do a set in total.  That is time in front of the TV or listening to music in
the evening.  It does not even seem like work... relaxing time in the evening.

Ed Tomlinson
Vancouver Wa