I make my bass dampers as per Bill Spurlock's upright damper articles in the Journal. I believe I make them 2 & 3/8" long for the bass. A big improvement over the 1" you find. David Ilvedson, RPT Pacifica, CA > Replacing the dampers is easy as well. > > FIrst check the dampers for quality, sizing, width, etc. Best quality > for best results. I like to use slightly longer dampers in the bass, if > I can get them. > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC