Making new damper lift tray

Wimblees@aol.com Wimblees@aol.com
Thu, 10 Sep 1998 22:54:41 EDT


In a message dated 98-09-10 13:24:06 EDT, you write:

<< 20 year old Sohmer grand, model 57
 
 During a recent move, the pitman got wedged out of place and really warped
 the damper lift tray.  Even when the sustain pedal is adjusted with no lost
 motion, the bass and treble dampers will not even lift off of the strings.
 After adjusting all of the capstans on the lift tray that adjust damper
 lift with the pedal, there is still only about 1/16" lift in the dampers.
 
 Has anyone had good experience in unwarping one of these damper lift trays?
  Is it easier to make a new one?  And lastly, how much time should I
 estimate the job will take?  (The moving company insurance will be paying
me.)
 
 Thanks!
 David Vanderhoofven
  >>


David:

Are you sure the tray is warped? On some of these pianos, the tray is held in
place by L brackets. You might look to see if you can straighten the brackets
out to level out the tray.

Wim 


This PTG archive page provided courtesy of Moy Piano Service, LLC