John.. The one who knows more about ivory than anybody is Wm. J. Smith who is in the Seattle Chapter of PTG. If you get the PTG magazine he had his pix on the front page some time in last year or so. Dick MT -----Original Message----- From: John R Fortiner <pianoserv440@juno.com> To: pianotech@ptg.org <pianotech@ptg.org> Date: Saturday, September 19, 1998 9:51 PM Subject: Re: key top repair advice needed (Richard Wagner) >Paul: Will you please let me know what issue it is in with page no.s, >etc. >Thanks a lot. > > John R. Fortiner >On Fri, 18 Sep 1998 07:28:33 EDT NBWW@AOL.COM writes: >>Susan and list >> >>For those who may be interested, "Scientific American" magazine had an >>interesting article about the ivory industry. I did not look any >>farther, but >>I'm sure there are other articles etc. written about the trade. It's >>been >>several years since I read it, but I do remember the article >>describing the >>cutting, grading and bleaching process. I may have a copy of the >>article if >>anyone is interested. >> >>Paul Chick RPT >> > >_____________________________________________________________________ >You don't need to buy Internet access to use free Internet e-mail. >Get completely free e-mail from Juno at http://www.juno.com >Or call Juno at (800) 654-JUNO [654-5866] >
This PTG archive page provided courtesy of Moy Piano Service, LLC