Hello, Carman, I am sorry that I cannot quote you the source, but I recall reading somewhere (?) about the use of lubricants. The one recommended was a product from Radio Shack called Precision Oiler. In the packaging it indicates that it is to be used with "electronic equipment and other household applications". As well, there is mention of "Teflon and Fluon" in the mix. It is described as a "super-slippery lubricant (which) resists dust, does not coagulate, and has no oily residue". I have used this on several pianos and am quite pleased with the apparent result. In later tunings I have noticed no negative sign of the previous lubrication. It certainly makes the string movement smoother. I like the packaging of this product as it comes in a plastic tube with a long thin needle applicator. It is easy to squeeze and run along string bearing points - very quick application. I would be very interested in the chemical experts out there giving their opinion on this product. Also, I am wondering if the concern about voiding waranties would be applicable to this product. Sincerely, Tom Dickson >From: cgpiano@webtv.net (Carman Gentile) >Reply-To: pianotech@ptg.org >To: pianotech@ptg.org >Subject: more bearing lubricants >Date: Wed, 11 Aug 1999 20:12:33 -0700 (PDT) > > I am soliciting more advice on bearing lubricants. Tuning is less of >a struggle when I routinely lube the bearings before every tuning on >every piano. I do not limit it to just rusty strings, but all pianos. >"Joy's Rust-Solv" works well for all pianos but the smell is too strong >for most of my clients. > > I am still searching for a LOW ODOR lubricant that is safe for piano >strings to be used routinely. > > Have not found "Breakfree CLF" and would like to hear from those >who've used it. > >Mr. Carman Gentile RPT > > > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC