Shims and soundboardrepair.

[Richard Brekne]

I made my own out of a dremel. I never shim more then about half way through the
board. If the crack is wider then that allows for I first tape the back and epoxy
fill so I can use a wide blunt shim. I find actually that these instances seem to
have less a tendency toward new crack along the side of the shim then shiming with
wood glue.

Richard Brekne
I.C.P.T.G.  N.P.T.F.
Bergen, Norway

David ilvedson wrote:

> How many who are shimming have used Bill Spurlock's router
> shimming system?  Any comments?
>
> David I.
>