Hello Roger, Hmmm. It does look like it might pay to do a little measuring before I start adding lead to the keys. Maybe this was the piano that was dropped down the elevator shaft. Roger Jolly wrote: > > Hi Tom, > From the touch weight spreads it looks as of the treble action > mount bolt is too far out from the strings. Two checks. Is the dip shallow > towards the treble? Check that the capstans are lifting the wips at the > same distance bass to treble. > You could also have a twisted action rail. > Another thing to check, the rail has a spacing bolt that presses against > the plate. Press on the rail with a screw driver to make sure the rail is > not flexing. This can give you a clue to a possible twisted rail > Just some thing to check, before starting a weight off. As would doubt if > this instrument left the factory with these kind of weights. > Regards Roger > -- Thomas A. Cole, RPT Santa Cruz, CA mailto:tcole@cruzio.com
This PTG archive page provided courtesy of Moy Piano Service, LLC