Hi Phil, I would suspect your problem is tight damper lever wire flange centre pins. Especially if it is a unit that was manufactured by Samick. Regards, John M.Ross Windsor, Nova Scotia, Canada ----- Original Message ----- From: Phil Bondi <tito@PhilBondi.com> To: Pianotech List <pianotech@ptg.org> Sent: Sunday, December 19, 1999 1:55 PM Subject: A Puzzler > Wurlitzer C-153( Bass Sustain for those who don't know). > > The problem: > > When the Damper Pedal is pressed hard and deep, the Bass Section of the Dampers > does not come back to the rest position. > > hint: > > The solution involves 3 different things.. > > Anyone correctly identifying all three will get.... > > "atta boy" or 'girl'! (see, I remembered, ladies!) > > Rook >
This PTG archive page provided courtesy of Moy Piano Service, LLC