>...my question is...is there any materials or procedures that are good >for bolstering the uneven knuckle and maintain a good “roll” and >shape... >...Any suggestions?... >David Chadwick RPT >Las Vegas, NV Wanted to present another view. First and foremost, it's always a judgement call based on one's experience with such things and the particulars of each situation. I've had excellent results bolstering knuckle sets that have flattening through use. No need to replace unless the leather is worn, wasted, and/or the inner core is shot. Currently I am using a yarn material and an uphostery needle to thread the yarn. Have even used dental floss. Keith McGavern kam544@earthlink.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA
This PTG archive page provided courtesy of Moy Piano Service, LLC