Kawai Damper Rail Problem

[Avery Todd]

Hi Jon,

   You're correct. That would probably have worked (and it was a phillips)
but I didn't want to take the time to leave campus and go buy me a screw
driver t_h_a_t long. :-)
   The only problem I MIGHT have had, was that the wood blocks had a
slight amount of glue on them to help hold them to the tray (in addition
to the screws). Because of not being able to see well, I "might" have
thought there was another screw somewhere that I couldn't see. The block
had to be forcibly removed to break the glue joint. Next time I'll know.
At least on Kawai's. :-)
   Thanks again.

Avery

>If I am diagnosing the problem correctly, first unscrew the damper guide
>rails. Unscrew the tray end blocks and ease the whole tray forwards until
>you can get a  l_o_n_g  screw driver to fit into the screw slots on the
>block fitted to tray. Tighten the blocks to the tray and ease back the tray.
>Regulation undisturbed.
>
>I had to get a long driver at a auto parts store (K-B brand screw driver),
>it will probably have to be a phillips.
>
>Jon Page